Rules and Guidelines
Want to participate in the discussions? Please read our Community Rules and Guidelines. Need some help? Visit Support and Answers.

  • State Not Answered
  • Locked Locked
  • Replies 12 replies
  • Subscribers 34 subscribers
  • Views 1933 views
  • Users 0 members are here
Options
You may also be interested in
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Wiring testing

garyolly

I work on bespoke training equipment for the defence industry. Due to a recent contract change, we are once again going through a Demarcation phase. One party has accepted testing responsibilities up to and including the circuit breaker panels that supply my equipment. Another party is now suggesting that all cabling going forward to motors, winches, control circuits etc, need to be tested. I regularly test motor windings and all junction boxes at the equipment but have never felt the need to test the cabling running from the breaker panel to the junction box. I have always assumed (i know, never assume) that should a fault arise with the cables, I would diagnose, fix and record. Should I be testing the control cables or not? Earth testing is completed annually, P.A.T testing for portables is completed annually.  Thanks   

Parents
  • 0

    Hi David, this is not a commercial or private landlord site. Many of the cables and control circuits are in different areas and buildings. One party has already accepted responsibility for lighting and domestic services. It's just our heavy plant that is the sticking point. 

Reply
  • 0

    Hi David, this is not a commercial or private landlord site. Many of the cables and control circuits are in different areas and buildings. One party has already accepted responsibility for lighting and domestic services. It's just our heavy plant that is the sticking point. 

Children
No Data

Community Rules & Guidelines