Rules and Guidelines
Want to participate in the discussions? Please read our Community Rules and Guidelines. Need some help? Visit Support and Answers.

  • State Not Answered
  • Locked Locked
  • Replies 8 replies
  • Subscribers 34 subscribers
  • Views 1395 views
  • Users 0 members are here
Options
You may also be interested in
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

SWA Earthing

Former Community Member
Former Community Member

Hi All, 

I'm currently Installing Cabling for a Hot Tub Instead of Running SWA all the way through the house, I have used 6mm T+E 10m to run from Consumer unit through the ceiling of the house. 

Just before it enters outside I have then used a Junction box to connect this with SWA. As the SWA only starts 10m away from the Consumer unit will I need to run a separate earth cable for the armour back to source (Consumer unit)?

Thanks in advance.

 

Parents
  • Former Community Member
    0 Former Community Member

    6.00mm twin and earth, which has a 2.5mm cpc.( although some have 4.0mm)

    Not that I'm aware of and be compliant, it is normally the 10 mm2 that people think has 6 mm2 but it is only 4 mm2.

    Regards

    BOD

Reply
  • Former Community Member
    0 Former Community Member

    6.00mm twin and earth, which has a 2.5mm cpc.( although some have 4.0mm)

    Not that I'm aware of and be compliant, it is normally the 10 mm2 that people think has 6 mm2 but it is only 4 mm2.

    Regards

    BOD

Children
No Data

Community Rules & Guidelines