The IET is carrying out some important updates between 17-30 April and all of our websites will be view only. For more information, read this Announcement

This discussion is locked.
You cannot post a reply to this discussion. If you have a question start a new discussion

Do I need to buy BS 5839 & BS 5839 for Fire Alarm Installations?

Former Community Member
Former Community Member

Hi, just starting out on my own. I'm only ever going to be working on domestic electrical installations and will only install basic standard interlinked smoke and heat detectors/alarms (one on each floor etc.). The ‘IET guide to the building regulations’ gives decent information on installing these. It says that one fire alarm installation can be included on an EIC or additionally on a MEIWC. But it also says that “The fire alarm installation is to be designed, installed and tested in accordance with BS 5839-6" and that in all cases “a fire system certificate for the design installation and commissioning shall be completed and given to the person ordering the work”. 

Do I need to purchase BS 5839 Part 1 and Part 6: for Fire Alarm Installations?

Thanks!

 

Parents
  • Former Community Member
    0 Former Community Member

    Thanks for the replies. So I don't need to complete a ‘fire system certificate for the design installation and commissioning’ as the IET guide to the building regs says? The EIC should be enough? Talking about domestic here. Basic minimum requirements (1 smoke on each floor etc.)

Reply
  • Former Community Member
    0 Former Community Member

    Thanks for the replies. So I don't need to complete a ‘fire system certificate for the design installation and commissioning’ as the IET guide to the building regs says? The EIC should be enough? Talking about domestic here. Basic minimum requirements (1 smoke on each floor etc.)

Children
No Data