Rules and Guidelines
Want to participate in the discussions? Please read our Community Rules and Guidelines. Need some help? Visit Support and Answers.

  • State Not Answered
  • Locked Locked
  • Replies 12 replies
  • Subscribers 34 subscribers
  • Views 1634 views
  • Users 0 members are here
Options
You may also be interested in
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

BS 7671 Section 521.8.3

Former Community Member
Former Community Member

Section 521.8.3 of BS7671 states: Where two or more circuits are terminated in a single junction box this shall comply with BS EN 60670-22. My question is what if several circuits will terminate in a single wiring device back box which are usually  manufactured to comply with   BS EN 60670-1.

Parents
  • 0

    The I think the simple answer is if it’s traditional junction box it needs to be fixed to something, accessible and the cables going into it need to be clipped, but if it’s a new style maintenance free box then those are not requirements.

Reply
  • 0

    The I think the simple answer is if it’s traditional junction box it needs to be fixed to something, accessible and the cables going into it need to be clipped, but if it’s a new style maintenance free box then those are not requirements.

Children
No Data

Community Rules & Guidelines