Rules and Guidelines
Want to participate in the discussions? Please read our Community Rules and Guidelines. Need some help? Visit Support and Answers.

  • State Not Answered
  • Locked Locked
  • Replies 16 replies
  • Subscribers 32 subscribers
  • Views 1956 views
  • Users 0 members are here
Options
You may also be interested in
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

LV fuse replacement safety

Kelly Marie Angel

Hi all I know that in this country and possibly in Europe too when DNO faultsmen  are replacing LV fuses in substations and distribution  pillars  they generally wear lots of PPE  sensible in view of  the flash and bang you get if there's still a fault however I saw a video from India  where the guy literally stood on top of the transformer  and put fusewire  a cross the LV terminals where I'm guessing a proper fuse should go  there's no checking contacts  are isolated before putting the wire on. Similar with the HV side the videos by BEEE WORKS  The videos are only a year or 2 old

Parents
  • 0

    I did a job recently involving live testing. I did a loop impedance test and turned around to write the result down to see a Rhinoceros standing 500mm behind me watching what I was doing. Would have made a good training slide but no photos allowed in the non-public areas. 

Reply
  • 0

    I did a job recently involving live testing. I did a loop impedance test and turned around to write the result down to see a Rhinoceros standing 500mm behind me watching what I was doing. Would have made a good training slide but no photos allowed in the non-public areas. 

Children
No Data

Community Rules & Guidelines