Rules and Guidelines
Want to participate in the discussions? Please read our Community Rules and Guidelines. Need some help? Visit Support and Answers.

  • State Not Answered
  • Locked Locked
  • Replies 6 replies
  • Subscribers 32 subscribers
  • Views 872 views
  • Users 0 members are here
Options
You may also be interested in
This discussion is locked.
You cannot post a reply to this discussion. If you have a question start a new discussion

Interlocked IEC 60309 sockets

Richard Henderson

I am looking at an existing design which we will be repeating a few times. It includes various sockets from 32A to 125A; all of them are interlocked IEC60309 type.

I cannot see a reason for them to be interlocked. What is the reason for an interlock anyway? I suppose it could be to stop people from poking their fingers into the female ‘pins’ of a live 125A socket but I'm pretty sure they're too small (standard IEC finger is 12mm). There is also the risk of them being disconnected under load and drawing an arc, but that seems a bit of a small risk to me unless in an EX zone, in which case, I'd imagine they're not allowed at all.

Does anyone know the  reason for the interlock and when it is needed? Particularly in the case of 125A?

 

thanks

Parents
  • 0

    It varies - sometimes it is in lieu of shutters - e.g. caravan sockets now have to be interlocked in some way (to prevent children poking things into live contact tubes) to give a similar level of safety to domestic sockets and for larger sizes (>32A) it's because the contacts aren't rated for functional switching of load currents (probably more due to the damage to the contact surfaces by repeated arcing events than any direct hazard from the arcing itself).

      - Andy.

Reply
  • 0

    It varies - sometimes it is in lieu of shutters - e.g. caravan sockets now have to be interlocked in some way (to prevent children poking things into live contact tubes) to give a similar level of safety to domestic sockets and for larger sizes (>32A) it's because the contacts aren't rated for functional switching of load currents (probably more due to the damage to the contact surfaces by repeated arcing events than any direct hazard from the arcing itself).

      - Andy.

Children
No Data

Join us to get the best from IET EngX.

Joining EngX lets you personalise your experience so you stay up to date on the topics that interest you, plus you’ll be able to make connections who are looking to collaborate, exchange ideas and more.

Join us Not now

Community Rules & Guidelines