Rules and Guidelines
Want to participate in the discussions? Please read our Community Rules and Guidelines. Need some help? Visit Support and Answers.

  • State Not Answered
  • Locked Locked
  • Replies 14 replies
  • Subscribers 34 subscribers
  • Views 1559 views
  • Users 0 members are here
Options
You may also be interested in
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Locking switch for workshop

JDW

I have two small machines running from a dedicated 16a radial circuit both on switched fused spurs 

I want to add some safety so the machines cannot be operated, I was thinking of adding a locking switch in the circuit  

Would this switch (see link) fitted before both the machines be adequate?

https://www.screwfix.com/p/schneider-electric-lisse-20ax-1-gang-dp-locking-control-switch-white/9515j

Parents
  • 0

    I fitted twenty one of the socket version in halls and on landings in seven blocks of flats for the cleaners to use, every one of them uses the same key, so I had forty two identical keys to give to the housing association manage, she actually ended up getting forty ?

    So they aren’t super secure, but if every one of them did have a different key it would be a nightmare managing the keys.

Reply
  • 0

    I fitted twenty one of the socket version in halls and on landings in seven blocks of flats for the cleaners to use, every one of them uses the same key, so I had forty two identical keys to give to the housing association manage, she actually ended up getting forty ?

    So they aren’t super secure, but if every one of them did have a different key it would be a nightmare managing the keys.

Children
No Data

Community Rules & Guidelines