Rules and Guidelines
Want to participate in the discussions? Please read our Community Rules and Guidelines. Need some help? Visit Support and Answers.

  • State Not Answered
  • Locked Locked
  • Replies 14 replies
  • Subscribers 34 subscribers
  • Views 1559 views
  • Users 0 members are here
Options
You may also be interested in
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Locking switch for workshop

JDW

I have two small machines running from a dedicated 16a radial circuit both on switched fused spurs 

I want to add some safety so the machines cannot be operated, I was thinking of adding a locking switch in the circuit  

Would this switch (see link) fitted before both the machines be adequate?

https://www.screwfix.com/p/schneider-electric-lisse-20ax-1-gang-dp-locking-control-switch-white/9515j

Parents
  • 0

    20Amp X means that it can be used with inductive loads, so should be o.k. for small domestic machines.

    Z.

Reply
  • 0

    20Amp X means that it can be used with inductive loads, so should be o.k. for small domestic machines.

    Z.

Children
No Data

Community Rules & Guidelines