This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Metal Class 2 Wall Lights.

I was testing some chrome wall lights today for earthing. They were not earthed. I could not tell initially if they were Class 1 or 2. I took one off its stirrup wall bracket and had a look behind the base plate. A label inside confirmed that it was a Class 2 light fitting.

But, the choc blocks floating about in the metal circular base, and the metal wall bracket could theoretically liven up the fitting if a strand of conductor was left by the installer, and it touched the metal parts. This home has no R.C.D. protection at all.

There must be many such wall lights about.

Z.

Parents
  • wallywombat: 
     

    ietmgreen: 
     

    If the light switch is off, where is the voltage providing the fatal shock.???

    That's why I put “know” in italics - because the householder is convinced that the light switch is off, but with a dead/missing bulb and no test equipment, it's easy to get it wrong - especially with 2-way switching. Or someone else switches it on right after the householder checks that it's off.

    OK. Your italics were too subtle for me.

Reply
  • wallywombat: 
     

    ietmgreen: 
     

    If the light switch is off, where is the voltage providing the fatal shock.???

    That's why I put “know” in italics - because the householder is convinced that the light switch is off, but with a dead/missing bulb and no test equipment, it's easy to get it wrong - especially with 2-way switching. Or someone else switches it on right after the householder checks that it's off.

    OK. Your italics were too subtle for me.

Children
No Data