Rules and Guidelines
Want to participate in the discussions? Please read our Community Rules and Guidelines. Need some help? Visit Support and Answers.

  • State Not Answered
  • Locked Locked
  • Replies 18 replies
  • Subscribers 32 subscribers
  • Views 3497 views
  • Users 0 members are here
Options
You may also be interested in
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Metal Class 2 Wall Lights.

Zoomup

I was testing some chrome wall lights today for earthing. They were not earthed. I could not tell initially if they were Class 1 or 2. I took one off its stirrup wall bracket and had a look behind the base plate. A label inside confirmed that it was a Class 2 light fitting.

But, the choc blocks floating about in the metal circular base, and the metal wall bracket could theoretically liven up the fitting if a strand of conductor was left by the installer, and it touched the metal parts. This home has no R.C.D. protection at all.

There must be many such wall lights about.

Z.

Parents
  • 0

    the only way that I could imagine a Class II device was chromed plastic.

    Quite a few steel framed appliances are class II - I've got an an anglepoise lamp and a stainless steel cooker hood that both are. As long as there's reliable double or reinforced insulation between the live conductors and the metalwork it should be fine.

        - Andy.

Reply
  • 0

    the only way that I could imagine a Class II device was chromed plastic.

    Quite a few steel framed appliances are class II - I've got an an anglepoise lamp and a stainless steel cooker hood that both are. As long as there's reliable double or reinforced insulation between the live conductors and the metalwork it should be fine.

        - Andy.

Children
No Data

Community Rules & Guidelines