Rules and Guidelines
Want to participate in the discussions? Please read our Community Rules and Guidelines. Need some help? Visit Support and Answers.

  • State Not Answered
  • Locked Locked
  • Replies 21 replies
  • Subscribers 34 subscribers
  • Views 2384 views
  • Users 0 members are here
Options
You may also be interested in
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Onsite-substations

johnwicklover

Hi,

Just wondering for onsite-substations are they property of the DNO or the site owner? 

How would  the supplies be worked out? For example, will the DNO provide a supply point coming out of the substation with a fuse cut-out and meter ready to be connected to a panel board etc?

Thanks.

Regards,

J

Parents
  • 0

    Thanks for all your responses guys. 

    Also why don't they make cut-outs for greater than 600A supply. For example, this scenario where it can be upto 800A. I am assuming the blue line is the service cable coming into the customers property.  How will the meter for the energy supplier get connected ?

    Or as mentioned by others above, the metering will be done in the DNO owned/controlled bit?

    ade7c6e8ae8b57d22006396c92b17ac2-original-image.png

    Thanks.

Reply
  • 0

    Thanks for all your responses guys. 

    Also why don't they make cut-outs for greater than 600A supply. For example, this scenario where it can be upto 800A. I am assuming the blue line is the service cable coming into the customers property.  How will the meter for the energy supplier get connected ?

    Or as mentioned by others above, the metering will be done in the DNO owned/controlled bit?

    ade7c6e8ae8b57d22006396c92b17ac2-original-image.png

    Thanks.

Children
No Data

Community Rules & Guidelines