Are 5amp junction boxes acceptable on a 6amp lighting circuit?
I personally wouldn’t use them as they are too small, but if they are already fitted are they acceptable?
JDW:
Given the true load is fixed, and low, the rating of a lighting box is a bit of an irrelevance, as the real question relates to how many wires can be inserted without it failing to do up properly and is it in a sensible place to inspect.
Do they ever get inspected, most seem to be under floorboards!
Traditionally they were made accessible by the fitting of a floor “trap” over them. This was screwed down and the work TRAP was scrawled on it in pencil or Biro. They need no inspection if initially correctly installed.
Z.
JDW:
Given the true load is fixed, and low, the rating of a lighting box is a bit of an irrelevance, as the real question relates to how many wires can be inserted without it failing to do up properly and is it in a sensible place to inspect.
Do they ever get inspected, most seem to be under floorboards!
Traditionally they were made accessible by the fitting of a floor “trap” over them. This was screwed down and the work TRAP was scrawled on it in pencil or Biro. They need no inspection if initially correctly installed.
Z.
We're about to take you to the IET registration website. Don't worry though, you'll be sent straight back to the community after completing the registration.
Continue to the IET registration site