The IET is carrying out some important updates between 17-30 April and all of our websites will be view only. For more information, read this Announcement

Rules and Guidelines
Want to participate in the discussions? Please read our Community Rules and Guidelines. Need some help? Visit Support and Answers.

  • State Not Answered
  • Locked Locked
  • Replies 2 replies
  • Subscribers 31 subscribers
  • Views 589 views
  • Users 0 members are here
Options
You may also be interested in
This discussion is locked.
You cannot post a reply to this discussion. If you have a question start a new discussion

LSI"G" - Electronic Trip Units / Releases and Earth fault protection

Nick Parker

When do I use LSI “G” breakers? I have a TN-S system. The fault current would be high enough that for earth fault, over current protection also operates. Except where the code requires RCD (like sockets & heat tracing), I plan to use just thermal/ magnetic overcurrent protection for all the breakers in the switchboard.

Also would like to know, What's in vogue?

 

Parents
  • 0

    Which country are you in ?

    In a UK domestic setting the nearest thing is the RCBO, programmable units are more the domain of specialist kit like UPS installations or industrial units with lots of VSD etc; as they have higher CPC current by design and such things need someone skilled to set them up safely.

    my understanding is that the abbreviations you have used are more american-centric.

    • L = Long  (overload protection, usually an inverse-time like a thermal/magnetic breaker)
    • S = Short Time (short circuit protection of low level faults)
    • I = Instantaneous (short current protection of high level faults, analagous to the instantaneous magnetic trip of a thermal/magnetic breaker)
    • G = Ground Fault (equipment ground fault protection)

     

    Mike.

Reply
  • 0

    Which country are you in ?

    In a UK domestic setting the nearest thing is the RCBO, programmable units are more the domain of specialist kit like UPS installations or industrial units with lots of VSD etc; as they have higher CPC current by design and such things need someone skilled to set them up safely.

    my understanding is that the abbreviations you have used are more american-centric.

    • L = Long  (overload protection, usually an inverse-time like a thermal/magnetic breaker)
    • S = Short Time (short circuit protection of low level faults)
    • I = Instantaneous (short current protection of high level faults, analagous to the instantaneous magnetic trip of a thermal/magnetic breaker)
    • G = Ground Fault (equipment ground fault protection)

     

    Mike.

Children
No Data

Join us to get the best from IET EngX.

Joining EngX lets you personalise your experience so you stay up to date on the topics that interest you, plus you’ll be able to make connections who are looking to collaborate, exchange ideas and more.

Join us Not now

Community Rules & Guidelines