This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

MK LOGIC RAPID FIX

Anyone tried the new MK sockets with lever terminals?

https://www.screwfix.com/p/mk-logic-rapid-fix-13a-2-gang-dp-switched-socket-white-with-white-inserts-1-pack/814ph

Obvious failing to my eyes is only 3 PE terminals - if you're spurring off from a ring and prefer to have a fly-lead to the back box then you're going to need 4. (OK you could loop one of the c.p.c.s through the back box terminal if you're using reduced size c.p.c.s. (e.g. T&E) - but it's a bit messy and probably isn't going to work with full sized c.p.c.s. as most many back box terminals won't take more than one larger conductor).

   - Andy.

Parents
  • It is a good idea to charge more money… It probably saves a little time, although cable routing is probably much more important and difficult.

Reply
  • It is a good idea to charge more money… It probably saves a little time, although cable routing is probably much more important and difficult.

Children
No Data