This discussion is locked.

You cannot post a reply to this discussion. If you have a question start a new discussion

MK LOGIC RAPID FIX

Anyone tried the new MK sockets with lever terminals?

https://www.screwfix.com/p/mk-logic-rapid-fix-13a-2-gang-dp-switched-socket-white-with-white-inserts-1-pack/814ph

Obvious failing to my eyes is only 3 PE terminals - if you're spurring off from a ring and prefer to have a fly-lead to the back box then you're going to need 4. (OK you could loop one of the c.p.c.s through the back box terminal if you're using reduced size c.p.c.s. (e.g. T&E) - but it's a bit messy and probably isn't going to work with full sized c.p.c.s. as most many back box terminals won't take more than one larger conductor).

- Andy.

Parents

0 gkenyon over 2 years ago
Couple of “thumbs down” points:
“Test L” port is above N, and “Test N” is above L, which is unfortunate and confusing.
Colour coding for PE terminals is sadly green which doesn't comply with BS EN 60445 (or BS 7671, although BS 7671 doesn't apply to the product itself, only its selection).
Cancel
Vote Up 0 Vote Down

Cancel

Reply

0 gkenyon over 2 years ago
Couple of “thumbs down” points:
“Test L” port is above N, and “Test N” is above L, which is unfortunate and confusing.
Colour coding for PE terminals is sadly green which doesn't comply with BS EN 60445 (or BS 7671, although BS 7671 doesn't apply to the product itself, only its selection).
Cancel
Vote Up 0 Vote Down

Cancel

Children

No Data

MK LOGIC RAPID FIX

Join us to get the best from IET EngX.

Community Rules & Guidelines