Rules and Guidelines
Want to participate in the discussions? Please read our Community Rules and Guidelines. Need some help? Visit Support and Answers.

  • State Not Answered
  • Locked Locked
  • Replies 15 replies
  • Subscribers 28 subscribers
  • Views 1628 views
  • Users 0 members are here
Options
You may also be interested in
This discussion is locked.
You cannot post a reply to this discussion. If you have a question start a new discussion

MK LOGIC RAPID FIX

AJJewsbury

Anyone tried the new MK sockets with lever terminals?

https://www.screwfix.com/p/mk-logic-rapid-fix-13a-2-gang-dp-switched-socket-white-with-white-inserts-1-pack/814ph

Obvious failing to my eyes is only 3 PE terminals - if you're spurring off from a ring and prefer to have a fly-lead to the back box then you're going to need 4. (OK you could loop one of the c.p.c.s through the back box terminal if you're using reduced size c.p.c.s. (e.g. T&E) - but it's a bit messy and probably isn't going to work with full sized c.p.c.s. as most many back box terminals won't take more than one larger conductor).

   - Andy.

Parents
  • 0

    The Earth colour is not G/Y because that throws up all kinds of moulding difficulties, and means a complex second set of expensive dies and a double (2 shot) moulding machine.

    Some DIN rail earth terminals look like they've been single-shot moulded using a mix of yellow and green plastic - result is more of a smear of blotches rather than any kind of neat stripe and to my mind they look absolutely terrible - but presumably comply with standards.. Give me a plain colour and use symbol marking to identify the terminals any day.

       - Andy.

Reply
  • 0

    The Earth colour is not G/Y because that throws up all kinds of moulding difficulties, and means a complex second set of expensive dies and a double (2 shot) moulding machine.

    Some DIN rail earth terminals look like they've been single-shot moulded using a mix of yellow and green plastic - result is more of a smear of blotches rather than any kind of neat stripe and to my mind they look absolutely terrible - but presumably comply with standards.. Give me a plain colour and use symbol marking to identify the terminals any day.

       - Andy.

Children
No Data

Join us to get the best from IET EngX.

Joining EngX lets you personalise your experience so you stay up to date on the topics that interest you, plus you’ll be able to make connections who are looking to collaborate, exchange ideas and more.

Join us Not now

Community Rules & Guidelines