The IET is carrying out some important updates between 17-30 April and all of our websites will be view only. For more information, read this Announcement

Rules and Guidelines
Want to participate in the discussions? Please read our Community Rules and Guidelines. Need some help? Visit Support and Answers.

  • State Not Answered
  • Locked Locked
  • Replies 9 replies
  • Subscribers 31 subscribers
  • Views 1101 views
  • Users 0 members are here
Options
You may also be interested in
This discussion is locked.
You cannot post a reply to this discussion. If you have a question start a new discussion

Plug & Play Hot Tubs.

Zoomup

Sparkiemike recently mentioned plug and play hot tubs that are popular these days.

I came across one recently at a holiday cottage. It was just plugged into an outdoor weatherproof socket. The hot tub was quite small as hot tubs go. It sat on flagstones on soil in the garden. It was possible to have one foot in the water and the other on a flagstone.

The earthing arrangement was P.M.E.

I was not happy with that so I TT'd the socket, and converted it to an R.C.D. type socket. The circuit is R.C.B.O. proteced at the consumer unit, but I do like belt and braces R.C.D. protection is critical situations like this.

How many D.I.Yers will install these plug and play hot tubs in the garden without considering the electrical safety aspects?

Z.

 

 

 

Parents
  • 0

    The polluted water with many additions may be quite conductive.

    But how conductive? In the early experiments with plastic pipes it was noticed that central heating inhibitor produced a very noticeable reduction in water resistance - yet even with a double dose of inhibitor a few tens of cm of plastic pipe was still quite sufficient to keep any possible shock currents well below danger levels. Unless we're expecting the ‘pollution’ to consist of magnetised iron filings, how conductive is the water really likely to be?

       - Andy.

Reply
  • 0

    The polluted water with many additions may be quite conductive.

    But how conductive? In the early experiments with plastic pipes it was noticed that central heating inhibitor produced a very noticeable reduction in water resistance - yet even with a double dose of inhibitor a few tens of cm of plastic pipe was still quite sufficient to keep any possible shock currents well below danger levels. Unless we're expecting the ‘pollution’ to consist of magnetised iron filings, how conductive is the water really likely to be?

       - Andy.

Children
No Data

Join us to get the best from IET EngX.

Joining EngX lets you personalise your experience so you stay up to date on the topics that interest you, plus you’ll be able to make connections who are looking to collaborate, exchange ideas and more.

Join us Not now

Community Rules & Guidelines