Rules and Guidelines
Want to participate in the discussions? Please read our Community Rules and Guidelines. Need some help? Visit Support and Answers.

  • State Not Answered
  • Locked Locked
  • Replies 37 replies
  • Subscribers 32 subscribers
  • Views 4388 views
  • Users 0 members are here
Options
You may also be interested in
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

PE advice by Napit (hot tubs)

ebee

There is an article in PE and I have just received it via email.

I am disappointed that the article seems to suggest that it contains all you need to know yet no mention is made of earthing systems

Parents
  • 0

    I might be talking out of my hat here, but why not combine both systems? Why not export PME via the swa and 3rd core, tie both together at both ends, the tie both to a rod at the destination end too? Belt & braces?

    Otherwise, we need to be looking at siting the electrical apparatus, pump, water heater etc remotely from the tub and further isolating heated pumped water through the use of distilled water and the requisite length of plastic pipework.

Reply
  • 0

    I might be talking out of my hat here, but why not combine both systems? Why not export PME via the swa and 3rd core, tie both together at both ends, the tie both to a rod at the destination end too? Belt & braces?

    Otherwise, we need to be looking at siting the electrical apparatus, pump, water heater etc remotely from the tub and further isolating heated pumped water through the use of distilled water and the requisite length of plastic pipework.

Children
No Data

Community Rules & Guidelines