Rules and Guidelines
Want to participate in the discussions? Please read our Community Rules and Guidelines. Need some help? Visit Support and Answers.

  • State Not Answered
  • Locked Locked
  • Replies 25 replies
  • Subscribers 32 subscribers
  • Views 2692 views
  • Users 0 members are here
Options
You may also be interested in
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

The dreaded bonding again

Kelly Marie Angel

Sorry for this but my boiler recently had her annual service all was well except they said I don't have any bonding in place except I think I do the gas main is bonded in the meter cupboard and the radiators and hot and cold water feeds are all bonded in the bathroom upstairs. All pipework is copper throughout the plumbing never been altered in 40 years except for a new boiler oh and removal of the water tanks. So can I be confident the bonding upstairs is good enough? 

Parents
  • 0

    John Peckham: 
     

     

     

    Kelly

    If you have seen an electrode laying next to the joint in the ground that is almost certainly a PME supply. The DNOs should/maybe lay an earth electrode next to a joint in a 3 phase cable on a PME service. 

     

     

    John unfortunately in the SSEN area (at least the old Wessex division ( where Kelly is)), an earth rod was often added connected to the lead sheath.

Reply
  • 0

    John Peckham: 
     

     

     

    Kelly

    If you have seen an electrode laying next to the joint in the ground that is almost certainly a PME supply. The DNOs should/maybe lay an earth electrode next to a joint in a 3 phase cable on a PME service. 

     

     

    John unfortunately in the SSEN area (at least the old Wessex division ( where Kelly is)), an earth rod was often added connected to the lead sheath.

Children
No Data

Community Rules & Guidelines