This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Wiska boxes with wagos

Evening all

I’ve been a fan of wiska boxes for a while now and have been more commonly using the 407’s which come with the 3 lever 221 wagos and a mounting block included. Whilst I find the wagos great for lighting circuits I find the mounting block a bit fiddly and as such tend not to use them, just tucking the wagos neatly into the box once terminated. My question is, do wagos need to be fastened or suppported on some way inside an adaptable box? 
 

thanks

Parents
  • Baldyhugh: 
    My question was do terminations whether traditional strip connections or wagos require securing in an enclosure generally

    May be my earlier response was unclear. It is not so much a matter of keeping the connectors held firmly as keeping the cables lying in an orderly fashion.

    IIRC, the Wago literature explains the point.

    Of course, if the load in the circuit is well below the CCC, you have nothing to worry about.

Reply
  • Baldyhugh: 
    My question was do terminations whether traditional strip connections or wagos require securing in an enclosure generally

    May be my earlier response was unclear. It is not so much a matter of keeping the connectors held firmly as keeping the cables lying in an orderly fashion.

    IIRC, the Wago literature explains the point.

    Of course, if the load in the circuit is well below the CCC, you have nothing to worry about.

Children
No Data