Rules and Guidelines
Want to participate in the discussions? Please read our Community Rules and Guidelines. Need some help? Visit Support and Answers.

  • State Not Answered
  • Locked Locked
  • Replies 44 replies
  • Subscribers 32 subscribers
  • Views 5707 views
  • Users 0 members are here
Options
You may also be interested in
This discussion is locked.
You cannot post a reply to this discussion. If you have a question start a new discussion

Unvented Undersink Water Heaters. For D.I.Yers.

Zoomup

Carrying on from a recent thread about the potential dangers of amateurs installing unvented undersink water heaters incorrectly….. Click on this

 

Parents
  • 0

    You should get into routines when working, one of these is that when I am soldering pipes I open the taps.

    Around twenty years ago I was replacing a kitchen in a care home and there was a hand wash basin with non-concussive self closing taps, twice without thinking I soldered the pipes and fittings and twice it leaked, then I secured the taps open by wrapping insulation tap around them to release the built up air pressure within the pipes whilst soldering.

Reply
  • 0

    You should get into routines when working, one of these is that when I am soldering pipes I open the taps.

    Around twenty years ago I was replacing a kitchen in a care home and there was a hand wash basin with non-concussive self closing taps, twice without thinking I soldered the pipes and fittings and twice it leaked, then I secured the taps open by wrapping insulation tap around them to release the built up air pressure within the pipes whilst soldering.

Children
No Data

Join us to get the best from IET EngX.

Joining EngX lets you personalise your experience so you stay up to date on the topics that interest you, plus you’ll be able to make connections who are looking to collaborate, exchange ideas and more.

Join us Not now

Community Rules & Guidelines