Rules and Guidelines
Want to participate in the discussions? Please read our Community Rules and Guidelines. Need some help? Visit Support and Answers.

  • State Not Answered
  • Locked Locked
  • Replies 44 replies
  • Subscribers 32 subscribers
  • Views 6283 views
  • Users 0 members are here
Options
You may also be interested in
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Unvented Undersink Water Heaters. For D.I.Yers.

Zoomup

Carrying on from a recent thread about the potential dangers of amateurs installing unvented undersink water heaters incorrectly….. Click on this

 

Parents
  • 0

    More's the point …

    If you are teeing into an existing pipe, there will be water at the lowest point. If you cannot drain that bit, the pipe will never get hot enough for the solder to flow.

Reply
  • 0

    More's the point …

    If you are teeing into an existing pipe, there will be water at the lowest point. If you cannot drain that bit, the pipe will never get hot enough for the solder to flow.

Children
No Data

Community Rules & Guidelines