Rules and Guidelines
Want to participate in the discussions? Please read our Community Rules and Guidelines. Need some help? Visit Support and Answers.

  • State Not Answered
  • Locked Locked
  • Replies 8 replies
  • Subscribers 34 subscribers
  • Views 1020 views
  • Users 0 members are here
Options
You may also be interested in
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

for instance, using 5x20 1A Fast Ceramic Fuse 250V in an installation ...

psychicwarrior

Good evening folks - thoughts/advice please

 

… is there a British Standard for these types of fuses ?

… how would using them in circuit sit regarding BS7671 ?

 

Regards

Habs

Parents
  • 0

    Thank you for the contributions

    I had noticed too, that the braking capacity was relatively low. 

    My thoughts were for their use in a [smaller form factor] fused terminal block requirement (I was discussing this a week or so back)   inside an enclosure, effectively to protect up close the final wiring to a lamp(s) arrangement.  It would indeed be backed up by a CPD at the board and really only offering overload protection.

    I couldn't find the BSEN  in  7671,  but so long as all the factors required of it are satisfactory, I couldn't see an issue.

    Is there anything to be aware of aside to what's already been mentioned in this thread please ?

    Thank you

    HAbS

     

     

Reply
  • 0

    Thank you for the contributions

    I had noticed too, that the braking capacity was relatively low. 

    My thoughts were for their use in a [smaller form factor] fused terminal block requirement (I was discussing this a week or so back)   inside an enclosure, effectively to protect up close the final wiring to a lamp(s) arrangement.  It would indeed be backed up by a CPD at the board and really only offering overload protection.

    I couldn't find the BSEN  in  7671,  but so long as all the factors required of it are satisfactory, I couldn't see an issue.

    Is there anything to be aware of aside to what's already been mentioned in this thread please ?

    Thank you

    HAbS

     

     

Children
No Data

Community Rules & Guidelines