Rules and Guidelines
Want to participate in the discussions? Please read our Community Rules and Guidelines. Need some help? Visit Support and Answers.

  • State Not Answered
  • Locked Locked
  • Replies 8 replies
  • Subscribers 34 subscribers
  • Views 1020 views
  • Users 0 members are here
Options
You may also be interested in
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

for instance, using 5x20 1A Fast Ceramic Fuse 250V in an installation ...

psychicwarrior

Good evening folks - thoughts/advice please

 

… is there a British Standard for these types of fuses ?

… how would using them in circuit sit regarding BS7671 ?

 

Regards

Habs

Parents
  • 0

    I have seen this type of fuse used within fluorescent light fittings, but not that often. BS 1362 types were more common. 

    A drawback of the mini fuses is the likelihood of replacement with unsuitable types. Plain glass fuses with a very low breaking capacity are available in this size. Sometimes as low as 100 amps, and that only at ELV, not suitable for mains use.

Reply
  • 0

    I have seen this type of fuse used within fluorescent light fittings, but not that often. BS 1362 types were more common. 

    A drawback of the mini fuses is the likelihood of replacement with unsuitable types. Plain glass fuses with a very low breaking capacity are available in this size. Sometimes as low as 100 amps, and that only at ELV, not suitable for mains use.

Children
No Data

Community Rules & Guidelines