Rules and Guidelines
Want to participate in the discussions? Please read our Community Rules and Guidelines. Need some help? Visit Support and Answers.

  • State Not Answered
  • Locked Locked
  • Replies 11 replies
  • Subscribers 34 subscribers
  • Views 1229 views
  • Users 0 members are here
Options
You may also be interested in
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Silicon insulated test cable by the roll?

whjohnson

Those of you who make up your own test leads, where do you buy your cable from? Am thinking of knocking up a R2 wander lead with 30 metres of 4.00mm on a home made roll/holder. Thing is; I can only find lengths limited to 10 metres. Since a kewtech ready-made item costs nearly £100 I'm sure I can make something up for less than half that and which is superior.

Comments welcome.

Parents
  • 0

    Rapid electronics do 25m reels

    Farnell do 30m reels I hope you have deep pockets.

    /Unless you really need the heat resistance, I'd suggest extra flexible pvc is a better bet

    like this stuff at RS 

    For a lot less money you could have a reel of ordinary single, with a short flex tail soldered it for that last 3 feet to the meter or the light fitting..

    Could not an r2 lead be normal g/y flex single ?

    like this ?

    Mike.

     

Reply
  • 0

    Rapid electronics do 25m reels

    Farnell do 30m reels I hope you have deep pockets.

    /Unless you really need the heat resistance, I'd suggest extra flexible pvc is a better bet

    like this stuff at RS 

    For a lot less money you could have a reel of ordinary single, with a short flex tail soldered it for that last 3 feet to the meter or the light fitting..

    Could not an r2 lead be normal g/y flex single ?

    like this ?

    Mike.

     

Children
No Data

Community Rules & Guidelines