Rules and Guidelines
Want to participate in the discussions? Please read our Community Rules and Guidelines. Need some help? Visit Support and Answers.

  • State Not Answered
  • Locked Locked
  • Replies 11 replies
  • Subscribers 34 subscribers
  • Views 1229 views
  • Users 0 members are here
Options
You may also be interested in
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Silicon insulated test cable by the roll?

whjohnson

Those of you who make up your own test leads, where do you buy your cable from? Am thinking of knocking up a R2 wander lead with 30 metres of 4.00mm on a home made roll/holder. Thing is; I can only find lengths limited to 10 metres. Since a kewtech ready-made item costs nearly £100 I'm sure I can make something up for less than half that and which is superior.

Comments welcome.

Parents
  • 0

    dcbwhaley: 
     

    Tri-rated cable is specified to 1000v in BS 6231.  And 600v by UL and CSA

    But is typically only “single insulated”. Tri-rated is intended for use inside equipment such as switchgear and controlgear. 

Reply
  • 0

    dcbwhaley: 
     

    Tri-rated cable is specified to 1000v in BS 6231.  And 600v by UL and CSA

    But is typically only “single insulated”. Tri-rated is intended for use inside equipment such as switchgear and controlgear. 

Children
No Data

Community Rules & Guidelines