Rules and Guidelines
Want to participate in the discussions? Please read our Community Rules and Guidelines. Need some help? Visit Support and Answers.

  • State Not Answered
  • Locked Locked
  • Replies 21 replies
  • Subscribers 34 subscribers
  • Views 3003 views
  • Users 0 members are here
Options
You may also be interested in
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Electrical specification in sales particulars. When and where?

Former Community Member
Former Community Member

 “The Electric Installation is of the most perfect type and on the duplicate interchangeable system. At the far end of the Stable yard is a substantial Engine House having glazed white brick walls, and with coal cellar, boiler house and store adjoining, and containing two ”Davey Paxman" loco type boilers (each of 20-h.p,) with feed pump, steam injectors, etc. A spacious Dynamo Room, in which are two “Raworth Universal Brush Company's” engines and dynamos of 40-h.p., direct coupled. In this room is a very large marble switch-board which controls the whole of the installation, and there are also charging boards for small accumulators and electric broughams, overhead travelling crane, telephone to House, laundry and to the electric fire pumps. The electric current, which is 100 volts continuous, can be supplied direct from the dynamos, as well as from the 54 storage cells in the Battery Room, and which are of 1,200 amperes capacity."

Regards

BOD

 

Parents
  • 0

    Calcium carbide is less used these days but is still available on line.

    Acetylene for welding and cutting is usually supplied in steel cylinders these days, but modern acetylene plants do exist for on site production.

    Acetylene under significant pressure is very dangerous as it is liable to spontaneous explosion. The risk is increased by use of copper pipes as in time copper acetylide forms which is even more liable to spontaneous explosions.

    Some old but still extant law limits the working pressure of acetylene systems to some low figure.

    Acetylene cylinders contain the gas dissolved in acetone under relatively low pressure. They are still rather dangerous. 

Reply
  • 0

    Calcium carbide is less used these days but is still available on line.

    Acetylene for welding and cutting is usually supplied in steel cylinders these days, but modern acetylene plants do exist for on site production.

    Acetylene under significant pressure is very dangerous as it is liable to spontaneous explosion. The risk is increased by use of copper pipes as in time copper acetylide forms which is even more liable to spontaneous explosions.

    Some old but still extant law limits the working pressure of acetylene systems to some low figure.

    Acetylene cylinders contain the gas dissolved in acetone under relatively low pressure. They are still rather dangerous. 

Children
No Data

Community Rules & Guidelines