Rules and Guidelines
Want to participate in the discussions? Please read our Community Rules and Guidelines. Need some help? Visit Support and Answers.

  • State Not Answered
  • Locked Locked
  • Replies 13 replies
  • Subscribers 32 subscribers
  • Views 3883 views
  • Users 0 members are here
Options
You may also be interested in
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

RCD UPSIDE DOWN ?

garywwess

Hi All,  hmm,  i have a shiny box with a plug on it..  so far so good ..except the RCD is mounted upside down, i would have thought that generically speaking ALL switches for isolation or reset would have been “lift to reset” & trip down for off but cant find anything that backs this up.. but, the wording is also upside down on this one and on another where the wording is correctly oriented it clearly states up for ON when it is obviously the other way round (proved live).. 

any reference material you can point me too..

gary

Parents
  • 0

    If the RCD is marked “top” or “bottom” then it should in view be installed as directed. Otherwise I doubt that it matters. The up versus down convention for off has altered over the years.

Reply
  • 0

    If the RCD is marked “top” or “bottom” then it should in view be installed as directed. Otherwise I doubt that it matters. The up versus down convention for off has altered over the years.

Children
No Data

Community Rules & Guidelines