Rules and Guidelines
Want to participate in the discussions? Please read our Community Rules and Guidelines. Need some help? Visit Support and Answers.

  • State Not Answered
  • Locked Locked
  • Replies 15 replies
  • Subscribers 32 subscribers
  • Views 2106 views
  • Users 0 members are here
Options
You may also be interested in
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Outside Steel Conduit Joints.

Zoomup

We must maintain mechanical and electrical continuity of steel conduit, so can't use P.T.F.E tape or Loctite 55 at screwed joints to keep them watertight. Has anyone ever had water ingress at screwed conduit joints outside? 543.3.6.

Parents
  • 0

    Chris Pearson: 
     

    Even though we have discussed it twice recently, I am still struggling with the concept of forming a reasonably sealed system and then drilling holes in it.

     

    It's what I, sparks, used to do… condensation etc - too much pressure has to be released BUT… as per usual, I could be wrong!

    regards…

Reply
  • 0

    Chris Pearson: 
     

    Even though we have discussed it twice recently, I am still struggling with the concept of forming a reasonably sealed system and then drilling holes in it.

     

    It's what I, sparks, used to do… condensation etc - too much pressure has to be released BUT… as per usual, I could be wrong!

    regards…

Children
No Data

Community Rules & Guidelines