Rules and Guidelines
Want to participate in the discussions? Please read our Community Rules and Guidelines. Need some help? Visit Support and Answers.

  • State Not Answered
  • Locked Locked
  • Replies 9 replies
  • Subscribers 39 subscribers
  • Views 1282 views
  • Users 0 members are here
Options
You may also be interested in
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

M.C.B. Failure number two. A B6.

Zoomup

After an old hot filament G.U.10 lamp blew, the lighting B6 M.C.B. would not reset.  After testing the lighting circuit and replacing the M.C.B. all was well. Is this acceptable that a breaker can be damaged in such a way, or are they all now of very low quality? The make was an Alto brand.

Z.

Parents
  • 0

    You must of they were usually encased in little glass tubes right down near the bulb base better quality bulbs even had them in both lead in wires   hope you now know what I'm on about

Reply
  • 0

    You must of they were usually encased in little glass tubes right down near the bulb base better quality bulbs even had them in both lead in wires   hope you now know what I'm on about

Children

Community Rules & Guidelines