This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

O-PEN Devices... will there be a standard?

Hi ,

I am looking to find out if there is a standard being worked on for O-PEN devices that provide safety protection for single phase EVSE connected to a TN-C-S system?

I am fully aware of the information on this subject within the amendment to 7671 and the IET code of practice for EVSE installations, but wondered if a specific BS document was being drafted up. and if so, what the possible launch date was and how I could get hold of any provisional documents.

Regards

Rob

Parents
  • I am looking to find out if there is a standard being worked on for O-PEN devices that provide safety protection for single phase EVSE connected to a TN-C-S system?

    Whilst BSI's PEL/23/1/1 are not looking at a standard, IET Technical Standards has a committee looking at this at present, in fact for the past 18 months or so, with representatives from across the industry, and a draft is in progress. Producing a full standard is not a quick process. Once the draft is complete, it will go out for Public Comment before being finalized.

  • Thanks gkenyon.

    Would you happen to have any contact details for the chair of that committee?

Reply
  • Thanks gkenyon.

    Would you happen to have any contact details for the chair of that committee?

Children