Rules and Guidelines
Want to participate in the discussions? Please read our Community Rules and Guidelines. Need some help? Visit Support and Answers.

  • State Not Answered
  • Locked Locked
  • Replies 2 replies
  • Subscribers 36 subscribers
  • Views 465 views
  • Users 0 members are here
Options
You may also be interested in
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

AMD 2 .THE FUTURE OF TYPE A\C RCDs

whjohnson

So, no more Type A\C RCDs post AMD 2.

Upon what empirical criteria is this decision based upon? Where are the results of the research? Or is it just a result of an office water cooler chat during a break at the latest JPEL/64/CENLEC meeting?

  • 0

    There are no statistics, as per spd and afdd.

    When manufacturers sit in the jpel panel, they expect their r and d investment to be paid for.

  • 0 in reply to Jon Steward

    I would be most interested to hear the outcome of some experimentation being carried out by our esteemed Dave Stone on this subject. I knee-jerked into parting with a large wedge for a Type B DP RCD to protect a ground source heat pump fairly recently and now wonder if it was actually required, especially when the heat pump manufacturer's 'engineer' could not provide a definitive answer, and only came back with "We specify a Type B for our equipment" after I had posted him a article on the subject. from Doepke.

Community Rules & Guidelines