This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Lamp post lamp advice needed.

I was asked today to look at several Victorian style lamp posts which are not working. Apparently one out of the 7 works but the lamp is very dim.

I opened the fitting and found the components for a fluorescent lamp, however the lamp itself didn’t look fluorescent. I’m wondering if I should try a like for like replacement of the lamps or should be looking for a different type of lamp? 


Thanks for taking the time to read my question. 


Ben 

Parents
  • An example of a lamp being upgraded to LED by bypassing the ballast.

  • Agreed - not difficult, but if the original ballast is still servicable, surely the customer should be given the choice?

  • The70 Watt SON lamp may be brighter, have a different light quality, and may take a while to fire up to full light output on initial turn on.

    www.stouchlighting.com/.../led-vs-hps-lps-high-and-low-pressure-sodium

    Z.

  • The70 Watt SON lamp may be brighter, have a different light quality, and may take a while to fire up to full light output on initial turn on.

    Older people may find LED light much more difficult to read and see clearly in, and selection of colour temperature is very important for this reason. Also LED light disperses differently, making shady areas darker. Other people may be sensitive to LEDs operating at certain conversion frequencies used to convert from AC mains to DC, preferring "pure DC" powered LEDs.

Reply
  • The70 Watt SON lamp may be brighter, have a different light quality, and may take a while to fire up to full light output on initial turn on.

    Older people may find LED light much more difficult to read and see clearly in, and selection of colour temperature is very important for this reason. Also LED light disperses differently, making shady areas darker. Other people may be sensitive to LEDs operating at certain conversion frequencies used to convert from AC mains to DC, preferring "pure DC" powered LEDs.

Children