This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Current indication

Evening all, 

A client has asked if I can have an indication (from within the house) of when the septic tank pump is running, just for the peace of mind that they know that it does actually work!, I can't see anything obvious in terms of an off the shelf product, I'm thinking I would require a type of current monitoring device and a simple light indicating the pump is 'on' or even a figure confirming the amps being drawn. Any suggestions appreciated. 

Al

Parents
  • This is a USA site supplying a septic monitor, it monitors the health of the system and gives an alarm if there's a problem.  

    Introduction

    SepticSitter is a septic monitoring and early-warning system for onsite sewage systems. Non-contact sensors easily install in septic, pump tanks and drain fields, preventing hazardous system overloads. Real-time measurements are displayed in an online dashboard, historical data is stored for informed proactive maintenance and decision making.
    Jaymack12

    septicsitter.com/.../

Reply
  • This is a USA site supplying a septic monitor, it monitors the health of the system and gives an alarm if there's a problem.  

    Introduction

    SepticSitter is a septic monitoring and early-warning system for onsite sewage systems. Non-contact sensors easily install in septic, pump tanks and drain fields, preventing hazardous system overloads. Real-time measurements are displayed in an online dashboard, historical data is stored for informed proactive maintenance and decision making.
    Jaymack12

    septicsitter.com/.../

Children
No Data