Rules and Guidelines
Want to participate in the discussions? Please read our Community Rules and Guidelines. Need some help? Visit Support and Answers.

  • State Not Answered
  • Locked Locked
  • Replies 4 replies
  • Subscribers 36 subscribers
  • Views 689 views
  • Users 0 members are here
Options
You may also be interested in
This discussion is locked.
You cannot post a reply to this discussion. If you have a question start a new discussion

PIR for pump control

Sparks79

Hi all,

I’ve setup for a pump (300w) to be switched on/off via a PIR or similar device for a fountain, there’s a separate PIR that activates the in-ground lights, is a PIR suitable for switching an inductive load i.e. the motor in the pump? Is there a motor rated motion sensor / PIR available at 230v ? Any suggestions gratefully appreciated!

Parents
  • 0

    Some PIRs are rated for inductive loads like large discharge lamps, and might tolerate a small pump. I would be inclined to use a standard and cheap PIR that operates the pump via a relay.

  • 0 in reply to broadgage

    Thanks, yeah a relay could be the simplest option!

Reply Children
No Data

Join us to get the best from IET EngX.

Joining EngX lets you personalise your experience so you stay up to date on the topics that interest you, plus you’ll be able to make connections who are looking to collaborate, exchange ideas and more.

Join us Not now

Community Rules & Guidelines