Rules and Guidelines
Want to participate in the discussions? Please read our Community Rules and Guidelines. Need some help? Visit Support and Answers.

  • State Not Answered
  • Locked Locked
  • Replies 17 replies
  • Subscribers 40 subscribers
  • Views 4113 views
  • Users 0 members are here
Options
You may also be interested in
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Advice on training

MrJack96

Hi guys I hope this is the right section for this post. I was looking for a-bit of advice regarding experience and training. I’ve been in electrical maintenance for almost 5 years now. My qualification is engineering maintenance electrical NVQ 3. I’m also studying towards a HNC in electrical engineering. I feel like I lack experience in electrical installations and testing although I have also completed my test and inspection. I feel like I’m in a difficult place at the moment as I know I can do the work just lack confidence. I’ve tried reaching out to people to get more installations and testing experience unpaid and managed to get a day testing but it’s been a struggle.
I guess my ultimate goal is to be one of these electricians that can turn there hand to anything.

Sorry for the long post, any advice will be greatly appreciated

Parents
  • 0

    Hello Mr. Jack, your honesty is to be applauded. Have you tested your own home installation? And relatives and friends installations too?

    When I was younger I had not installed metal conduit. Then I had a job to install a short length for a builder in a council meeting hall. I obtained a length of steel conduit and practiced bending it in my garage. I had to use a home made bending block as I could not afford to buy a conduit bending machine. The block comprised a large block of wood with holes for the conduit to go through. Using lever action I eventually made a 90 degree bend.

    I did the job with the help of a friend, and was short changed by the builder who did not pay me the full amount asked for. I never was an expert at conduit bending but good enough to get by.

    So yes, get any chance you can to quietly inspect and test any installation. Also there are many Youtube videos on the subject that are very helpful.

    John Ward is very good. The videos may be a little dated and updates may be needed, but the basics are still there.

    Electrical Installation Testing - YouTube

    Good luck,

    Z.

  • 0 in reply to Zoomup
    Zoomup said:
    When I was younger I had not installed metal conduit.

    The 1/2 day (Friday pm) was optional on my course, but two of us gave it a go.

    When Zoomy was a lad, we didn't have eBay, but I suppose that there was Exchange & Mart. I certainly wouldn't want to bend conduit without a proper bender - I barely have the strength with one.

  • 0 in reply to Chris Pearson

    The trick when using a conduit bending machine, for those with weak arms, is to insert a large pole over the bending handle to increase leverage. Then get a heavy weight like an elephant to stand on the base to prevent the machine toppling over. I done that many times. Poor old Nellie.

    Z.

Reply
  • 0 in reply to Chris Pearson

    The trick when using a conduit bending machine, for those with weak arms, is to insert a large pole over the bending handle to increase leverage. Then get a heavy weight like an elephant to stand on the base to prevent the machine toppling over. I done that many times. Poor old Nellie.

    Z.

Children
No Data

Community Rules & Guidelines