Rules and Guidelines
Want to participate in the discussions? Please read our Community Rules and Guidelines. Need some help? Visit Support and Answers.

  • State Not Answered
  • Locked Locked
  • Replies 17 replies
  • Subscribers 40 subscribers
  • Views 4123 views
  • Users 0 members are here
Options
You may also be interested in
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Advice on training

MrJack96

Hi guys I hope this is the right section for this post. I was looking for a-bit of advice regarding experience and training. I’ve been in electrical maintenance for almost 5 years now. My qualification is engineering maintenance electrical NVQ 3. I’m also studying towards a HNC in electrical engineering. I feel like I lack experience in electrical installations and testing although I have also completed my test and inspection. I feel like I’m in a difficult place at the moment as I know I can do the work just lack confidence. I’ve tried reaching out to people to get more installations and testing experience unpaid and managed to get a day testing but it’s been a struggle.
I guess my ultimate goal is to be one of these electricians that can turn there hand to anything.

Sorry for the long post, any advice will be greatly appreciated

Parents
  • 0

    The IET Shop - Guidance Note 3: Inspection & Testing, 9th Edition

    Z.

  • 0 in reply to Zoomup

    Zoom, a very useful book if you appreciate the limitations, practicalities of the testing procedure.  Its unlikely to be so useful without hands on experience. Although, when I started teacher training, I suprised my tutor by teaching one of the three most practical demonstratable subjects, how to wire a BS1363 plug, as a theory class.  .......

  • 0 in reply to Legh Richardson

    I`ve lost track on how many times I`ve seen pictures of "correctly wired 13A Plugtops" only to find the cpc not long enough to enable last to pull out being the favourite item

  • 0 in reply to Legh Richardson

    Hello Legh, that is why I suggested earlier that there are some good hands-on Youtube videos covering Inspection and Testing. It's all out there if we look for it. Many of my skills were self taught before the internet was available. Books ruled then. We did very little practical stuff in the workshops at college.

    Testing is only like following a recipe book to make a meal. Start at "A" and work through the processes.

    Examples of old text books...

    Electrical Installation Practice H A Miller First Second Third Year Books 3rd Ed | eBay

    Z.

  • 0 in reply to Legh Richardson
    Legh Richardson said:
    teaching one of the three most practical demonstratable subjects, how to wire a BS1363 plug, as a theory class

    Funnily enough, I did that as my practical on a "teaching the teachers" course. I had wanted to demonstrate planing a straight edge on a board on the grounds that it would have made a right old mess, but Mrs P suggested a plug. That required at least 3 screwdrivers for the different size and type of screw heads, a good old-fashioned pen-knife, and an automatic wire stripper.

  • 0 in reply to Legh Richardson

    Guidance Note 3 has pictures and illustrations so is more than just a boring textbook. It is a how to do it book as well.

    Z.

Reply
  • 0 in reply to Legh Richardson

    Guidance Note 3 has pictures and illustrations so is more than just a boring textbook. It is a how to do it book as well.

    Z.

Children
No Data

Community Rules & Guidelines