The IET is carrying out some important updates between 17-30 April and all of our websites will be view only. For more information, read this Announcement

This discussion is locked.
You cannot post a reply to this discussion. If you have a question start a new discussion

EICR Coding for smoke detector hard wired into separate property ?

Hi Guys.   I did an EICR on a rental flat today. Flat is above a shop. Flat  has its own meter etc in the flat. Shop is completely separate electrically wise apart from a mains linked smoke detector . Supply to detectors are from the flat.  Installation looks late 80s early 90s. 

I have coded it as a C3 as it isn't dangerous for the flat but could be a problem for somebody working in the shop. I have mentioned it to the shop owner and noted it on the report.  I suspect it has been like it for 20 odd years so probably before the wireless bases were about.  Any thoughts on the coding please or should it not be coded at all.

Cheers   

Gary

Parents
  • What’s the difference between that and fire alarms in communal areas of flats that have a heat detector in the lobby within each of the flats, apart from voltage? 

Reply
  • What’s the difference between that and fire alarms in communal areas of flats that have a heat detector in the lobby within each of the flats, apart from voltage? 

Children
No Data