... is it reasonable to consider direct bonded construction, as a stud wall ?
and when it comes to installation methods would it be reasonable to consider for when the cable is against the board or against the brickwork
- no insulation method 'C' ?
- with insulation method 102 (flat) and 'A' (round) ? [bit hit on cable CCC gulp!]
e.g. pick a cable... 4mm T&E, clipped to brick (on an external wall possibly), direct bonded boarding over it with some form of insulation inbetween, then OCPD @ 32A is *not* fine
regards to all
Habs