Rules and Guidelines
Want to participate in the discussions? Please read our Community Rules and Guidelines. Need some help? Visit Support and Answers.

  • State Not Answered
  • Locked Locked
  • Replies 10 replies
  • Subscribers 32 subscribers
  • Views 1193 views
  • Users 0 members are here
Options
You may also be interested in
This discussion is locked.
You cannot post a reply to this discussion. If you have a question start a new discussion

direct bonded board to brick walls and cable ccc/installation method...along with ever increasing insulation efforts

psychicwarrior

... is it reasonable to consider direct bonded construction, as a stud wall ?

and when it comes to installation methods would it be reasonable to consider for when the cable is against the board or against the brickwork

- no insulation  method 'C' ?

- with insulation method  102 (flat) and 'A' (round) ?   [bit hit on cable CCC gulp!]

e.g. pick a cable...   4mm T&E,  clipped to brick (on an external wall possibly), direct bonded boarding over it with some form of insulation inbetween, then OCPD @ 32A is *not* fine

regards to all

Habs 

Parents
  • 0

    so the cable itself most likely won't be carrying anything like it's design current in future.

    Unless it's the cable that feeding the new fangled EV point, or the heatpump....

      - Andy.

Reply
  • 0

    so the cable itself most likely won't be carrying anything like it's design current in future.

    Unless it's the cable that feeding the new fangled EV point, or the heatpump....

      - Andy.

Children

Join us to get the best from IET EngX.

Joining EngX lets you personalise your experience so you stay up to date on the topics that interest you, plus you’ll be able to make connections who are looking to collaborate, exchange ideas and more.

Join us Not now

Community Rules & Guidelines