Rules and Guidelines
Want to participate in the discussions? Please read our Community Rules and Guidelines. Need some help? Visit Support and Answers.

  • State Not Answered
  • Locked Locked
  • Replies 24 replies
  • Subscribers 45 subscribers
  • Views 4320 views
  • Users 0 members are here
Options
You may also be interested in
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

CHANGES IN AMD 2 RELUCTANCE TO COMPLY

John Peckham

I heard before AMD 2 that compliance with the requirement to install AFDDs where required would stop clients having consumer units upgraded due to the additional cost. 

The requirement to fit as a "shall" is limited to 4 types of installation has anyone experienced a refusal to upgrade the installation with AFDDs when replacing a consumer unit?

Also has anyone experienced any reluctance when upgrading an installation where SPDs are required under the new provisions of AMD 2?

The same question as above, any reluctance to install smoke detectors in domestic premises where an SPD needs to be fitted to the circuit supply the smoke detectors?

Thanks

JP

 

Parents
  • 0

    Sparkingchip

    There is no "shall" requirement to fit AFDDS in your thatched cottage. It is however recommended so you might want to talk to your client about this.

    If the cables in the loft  are lighting cables probably a waste of time as AFDDS need to monitor at least 2 1/2 A of load current and probably the lighting is LED so probably a lot less than 1A. Steel conduit or MICC cables would be a better option for squirrel damage. In any case how do you get  £2K to £2K or more for AFDDS when they retail at £120 including VAT?

    Keylevel

    Where are these exposed bus bars on the consumer unit? No issue with all RCBOs as long as they are Type A. Will surge protection be fitted?

    I really want to hear about customer refusing to have work done because of the new requirements to install SPDs and ASFDDs in AMD 2. So could I ask readers of this thread not to include other rabbit hole questions on other topics.

    Thanks

    JP

  • 0 in reply to John Peckham

    There are a number of blanks missing next to the main switch. The unit is also very high, so someone could easily slip when trying to operate it.

    I don't have the details for what is to be installed, but I will report back when the job has been done (a couple of weeks). I can also ask the house owner to confirm if SPDs and AFDDs were ever brought up.

Reply
  • 0 in reply to John Peckham

    There are a number of blanks missing next to the main switch. The unit is also very high, so someone could easily slip when trying to operate it.

    I don't have the details for what is to be installed, but I will report back when the job has been done (a couple of weeks). I can also ask the house owner to confirm if SPDs and AFDDs were ever brought up.

Children
No Data

Community Rules & Guidelines