Rules and Guidelines
Want to participate in the discussions? Please read our Community Rules and Guidelines. Need some help? Visit Support and Answers.

  • State Suggested Answer
  • Locked Locked
  • Replies 28 replies
  • Helpful Answers 1 Helpful answer
  • Subscribers 40 subscribers
  • Views 3979 views
  • Users 0 members are here
Options
You may also be interested in
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Unidentified device next to 13A sockets

Harry Macdonald

I have been investigating a church organ that suddenly stopped working. This was rebuilt about 20 years ago using a data cable between the keyboard and the pipe section.

I have found two 13A sockets unused which are live and, just above them, two more which are not. All the electronic equipment is plugged in into the two which are not. Between the two is a box with the device small device in it

Can anyone identify it and advise its purpose. I am thinking some sort of surge protection but cannot identify any similar photos on google of find any identifying marks.

I'll post a photo when I can find out how. Copy/paste, drag n drop and insert don't work. It seems to want a URL but my photos don't have URLs.

Harry

Parents
  • 0

    Let's apply a little logic. The data between the keyboard console and the rest of the organ has probably only 2 possibilities : Madi or Ethernet.

    If the electronic box requires the SSR (I am pretty sure it is one due to the general packaging) to be on to power it the communication must also have a control pair to the SSR, as in neither case is the data continuous. Ethernet uses 4 wires of 8 in a Cat5 (or whatever) cable and Madi the same. The test is to plug the "controlled" plugs into the live sockets and see what happens, the whole lot will probably burst into life. If so you need to trace the control wires which will go back to the console. These SSRs have opto-isolated control, but as Mike says a range of control voltages, but if the control is in the data cable, probably 5V. If you find the SSR is faulty give me a call, I have some stock!

  • 0 in reply to David Stone

    That should say Midi not Madi! Madi is multichannel digital audio, but the acronyms get a bit mixed up, there are now so many (hundreds).

Reply
  • 0 in reply to David Stone

    That should say Midi not Madi! Madi is multichannel digital audio, but the acronyms get a bit mixed up, there are now so many (hundreds).

Children
  • 0 in reply to David Stone

    Join the the society for the removal of acronyms. Have Acronyms Terminally Extracted. (H.A.T.E.).

Community Rules & Guidelines