Rules and Guidelines
Want to participate in the discussions? Please read our Community Rules and Guidelines. Need some help? Visit Support and Answers.

  • Locked Locked
  • Replies 11 replies
  • Subscribers 34 subscribers
  • Views 1409 views
  • Users 0 members are here
Options
You may also be interested in
This discussion is locked.
You cannot post a reply to this discussion. If you have a question start a new discussion

Blanking Plate Challenge.

Zoomup

I had to fit a double blanking plate today over an old metal box. The socket was like this with four securing screws. I imagined that I would have to drill at least two if not four holes accurately in the new blanking plate but>>>>>>>>>>>>>>>>>the answer presented itself. How?

Parents

  • Yep, I found that the metal box in the wall did in fact have six lugs.

    Yes quite common - but many accessories didn't seem to take that into account, so often one set had to be bent back out of the way...

       - Andy.

Reply

  • Yep, I found that the metal box in the wall did in fact have six lugs.

    Yes quite common - but many accessories didn't seem to take that into account, so often one set had to be bent back out of the way...

       - Andy.

Children
No Data

Join us to get the best from IET EngX.

Joining EngX lets you personalise your experience so you stay up to date on the topics that interest you, plus you’ll be able to make connections who are looking to collaborate, exchange ideas and more.

Join us Not now

Community Rules & Guidelines