Rules and Guidelines
Want to participate in the discussions? Please read our Community Rules and Guidelines. Need some help? Visit Support and Answers.

  • State Helpful Answer
  • Locked Locked
  • Replies 20 replies
  • Subscribers 40 subscribers
  • Views 4424 views
  • Users 0 members are here
Options
You may also be interested in
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

551.4.3.2.1 Flats how to provide earth rod in island mode

DA

So reading the latest regs I take it we are to provide an earth rod in a prosumer setup for island mode supplies.

Any ideas how this works practically in a top floor flat?

Parents
  • 0

    It also depends on whether the system is for the individual flat, or whether a shared PEI approach is used.

    I think Mike's previous response covers most of the considerations - and the electrode doesn't have to be a 'rod'.

    I would add there's probably not a single solution that is right for all cases we might ever come across.

Reply
  • 0

    It also depends on whether the system is for the individual flat, or whether a shared PEI approach is used.

    I think Mike's previous response covers most of the considerations - and the electrode doesn't have to be a 'rod'.

    I would add there's probably not a single solution that is right for all cases we might ever come across.

Children
No Data

Community Rules & Guidelines