This discussion is locked.
You cannot post a reply to this discussion. If you have a question start a new discussion

Adding spurs to immersion heater circuit

About 25 years ago we had a shower fitted and the plumber added a fused spur to the immersion heater circuit for the pump.

I want to upgrade our heating system by fitting an ebus controller in the airing cupboard. This needs a mains supply and there is no accessible ring circuit. Is it permissible to add another fused spur to the immersion circuit?

Mike

Parents
  • I assume that the controller consumes very little, so you will not overload the circuit.

    The airing cupboard should not be warm 'cos the cylinder should be well lagged.

  • Yes to both (c:

    The controller consumption is 2VA.

    Mike

Reply Children
No Data