Rules and Guidelines
Want to participate in the discussions? Please read our Community Rules and Guidelines. Need some help? Visit Support and Answers.

  • State Helpful Answer
  • Locked Locked
  • Replies 21 replies
  • Subscribers 40 subscribers
  • Views 3648 views
  • Users 0 members are here
Options
You may also be interested in
This discussion is locked.
You cannot post a reply to this discussion. If you have a question start a new discussion

Electrician videos on Youtube. Are they dangerous to all?

David Stone

I was watching a bit of a Youtube video, which showed a DB with very "tidy" wiring, of the type that now appears to be in vogue. A large number of circuits were all bundled and cable tied into a very neat cable form of the type found inside Electronic equipment. The length of this was probably a couple of feet, so comes under the regulations for derating of cables in close proximity, and the overall rating of each circuit was probably 1/4 of that the designer expected. The cables inside switchgear should all be loose and as far as possible in free air to keep temperatures within limits, and as you know DBs get quite hot even with this arrangement. How have we got to this situation of incompetence? I did leave a comment, but this will probably be removed!

Parents
  • 0

    On the plus side, if people post videos of this kind of thing it does bring it out into the open and encourage discussion about it. 30 years ago we probably had the same sort of people doing the same kind of work, probably passing the technique onto their apprentices and probably a few others who came across their work and thought it looked neat - but it would mostly have gone unchallenged. I recall pictures of 3-phase DBs with "loomed" wiring.donkey's years ago.

       - Andy.

Reply
  • 0

    On the plus side, if people post videos of this kind of thing it does bring it out into the open and encourage discussion about it. 30 years ago we probably had the same sort of people doing the same kind of work, probably passing the technique onto their apprentices and probably a few others who came across their work and thought it looked neat - but it would mostly have gone unchallenged. I recall pictures of 3-phase DBs with "loomed" wiring.donkey's years ago.

       - Andy.

Children
No Data

Join us to get the best from IET EngX.

Joining EngX lets you personalise your experience so you stay up to date on the topics that interest you, plus you’ll be able to make connections who are looking to collaborate, exchange ideas and more.

Join us Not now

Community Rules & Guidelines