This discussion is locked.
You cannot post a reply to this discussion. If you have a question start a new discussion

LED floodlights causing induction hob to flicker on and off

A friend has a barn, the supply is fed from his house into a DB in the barn, (not sure if fed straight from the incoming supply in his house, or fed from a way in his DB board in his house)

He has LED floodlights (450w) x 10 in his field, fed from a way in his DB in the barn. 

When he has over 6 of the floodlights on, the induction hob in his home, fed from his house DB is flickering on and off. 


Has anyone got any clues as to why this is happening?

The barn has a TT earth setup. 

Parents
  • You could light a runway at Heathrow with 4500 W of LEDs!

    What does "flickering on and off" mean please? Does it mean that if the LEDs are on, the hob spontaneously turns itself on then off, etc? Or if the hob is already on, does it turn itself off and back on etc? What is flickering? Is it the hot plate or the controls?

Reply
  • You could light a runway at Heathrow with 4500 W of LEDs!

    What does "flickering on and off" mean please? Does it mean that if the LEDs are on, the hob spontaneously turns itself on then off, etc? Or if the hob is already on, does it turn itself off and back on etc? What is flickering? Is it the hot plate or the controls?

Children
  • That you could! It’s lighting up a big open air arena for horses.

    It’s the controls that’s flicking on and off when 6 or more of the lights in the arena are on. When the hob is turned off by the touch controls, not in use, they flick on and off and sort of sounds like it’s triggering a relay.

    It’s also playing funny with the tv in the living room too which is on a seperate circuit, when tv is on mute there’s noise through the speakers, like a noise you’d get with a grounding issue.

    I have videos of the above I’ve tried to attach to the post, 

    cheers