Rules and Guidelines
Want to participate in the discussions? Please read our Community Rules and Guidelines. Need some help? Visit Support and Answers.

  • State Not Answered
  • Locked Locked
  • Replies 3 replies
  • Subscribers 36 subscribers
  • Views 1549 views
  • Users 0 members are here
Options
You may also be interested in
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Max Zs for adjustable MCCB's

Gareth 1

When determining the max permitted Zs for an MCCB with variable settings.

Do you have to apply the Zs value for the maximum possible settings, regadless of actual settings.

OR

Is it permissible to apply the Zs value for the actual settings, despite the fact that these could be increased at a later date.

Many Thanks

Parents
  • 0

    The whole point of the adjustability is to allow the device to be matched to both the characteristics of the supply and the load. Any adjustment will be deliberate in a properly controlled system and the person doing the adjusting will need to be competent to do so. 

Reply
  • 0

    The whole point of the adjustability is to allow the device to be matched to both the characteristics of the supply and the load. Any adjustment will be deliberate in a properly controlled system and the person doing the adjusting will need to be competent to do so. 

Children
No Data

Community Rules & Guidelines