3 phase temp supply ?

Hi guys, iv been doing loads of basic new build single phase.

The next one is going to be 3 phase and a bigger house. I will treat as normal apart from adding a 3 phase board and balancing on the phases.

The owner has asked me to set up a temp supply. Can I do this but setting up say a garage board and couple of sockets, but using just one phase and not connecting the other two in, obviously neutral and earth will be connected. Thank you for any help

Parents
  • and balancing on the phases.

    Check with the DNO -  some (WPD?) I've heard prefer people to put the normal single phase loads all on the same phase (L1 say) and use the other two only for 3-phase loads (e.g. heat pumps and EV charge points). The idea being that they'll then balance things by rotating the phases for each house connection to the main - and can get a better overall balance that way than if say a whole estate is done with all the cookers on L1, showers on L2 and sockets on L3 or similar not entirely random pattern made up by electricians.

       - Andy.

Reply
  • and balancing on the phases.

    Check with the DNO -  some (WPD?) I've heard prefer people to put the normal single phase loads all on the same phase (L1 say) and use the other two only for 3-phase loads (e.g. heat pumps and EV charge points). The idea being that they'll then balance things by rotating the phases for each house connection to the main - and can get a better overall balance that way than if say a whole estate is done with all the cookers on L1, showers on L2 and sockets on L3 or similar not entirely random pattern made up by electricians.

       - Andy.

Children
No Data