Hi all I just started wiring a high end new build what will have solar and battery storage (done by others for MCS grant ) and was wondering if there is a way to send any excess power to water tank possibly a second immersion
There are a number of products out there that claim to do just this.
There are some which modulate a second immersion's power input based on some CTs clamped around the incomer as a simple solution.
There are much more sophisticated arrangements available now; for domestics these are often driven by the inverter datalogger, and generally use the same logic as required for EREC G100 export limitation schemes and for controlling the battery charge/discharge.
I don't work with domestic schemes very often though so can't recommend specific products, but the installer will probably be more than happy to discuss options.
(* No connection, and no experience with them in the field, just seen them at a number of trade shows)
There are a number of products out there that claim to do just this.
There are some which modulate a second immersion's power input based on some CTs clamped around the incomer as a simple solution.
There are much more sophisticated arrangements available now; for domestics these are often driven by the inverter datalogger, and generally use the same logic as required for EREC G100 export limitation schemes and for controlling the battery charge/discharge.
I don't work with domestic schemes very often though so can't recommend specific products, but the installer will probably be more than happy to discuss options.
(* No connection, and no experience with them in the field, just seen them at a number of trade shows)
We're about to take you to the IET registration website. Don't worry though, you'll be sent straight back to the community after completing the registration.
Continue to the IET registration site